Results 1 to 5 of 5
Thread: Dual extruders
-
03-20-2016, 10:21 AM #1
- Join Date
- Mar 2016
- Location
- Erie
- Posts
- 6
Dual extruders
Is their a way to have both extrudes printing at the same time? I am printing multiple parts and it would increase my overall print time if i could activate both extrudes.
-
03-20-2016, 11:51 AM #2
- Join Date
- Jan 2016
- Posts
- 3
Yes it is possible, it's called Ditto printing.
On the LCD screen of the printer you go to - Utilities > General Settings > Ditto Printing.
Mark
-
03-20-2016, 01:33 PM #3
- Join Date
- Mar 2016
- Location
- Erie
- Posts
- 6
Thank for the assistance markdirk.
-
03-21-2016, 12:34 PM #4
- Join Date
- Aug 2015
- Posts
- 256
Ditto printing is only for printing duplicates of the same object, and that object cannot be any wider than the distance between the nozzles.
In order to make it work you have to configure your slicer to treat your printer as a single extruder, then choose the ditto option in the firmware.
-
03-21-2016, 03:20 PM #5
yep it's on the one with sailfish. But not on the creator x. Which is the right way round as it happens.
Bugger me - had no idea I could do that :-)
Thanks for the infoLast edited by curious aardvark; 03-21-2016 at 03:26 PM.
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help