Results 1 to 10 of 22
Thread: Filament refusing to feed.
Threaded View
-
03-02-2016, 09:19 PM #9
- Join Date
- Nov 2015
- Posts
- 8
Jam.jpg
Thanks for all the replies - I've taken the fan off and the path is clear. Whatever the obstruction is it's about 24mm from the nozzle upwards (after the drive gear).
I'll try and find something thin to dislodge it - I've ordered a Cleaning Kit from eBay in the interim.....
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help