Results 1 to 10 of 11
Thread: Dryer filament box
Threaded View
-
03-02-2016, 07:36 PM #10
- Join Date
- May 2014
- Posts
- 67
I would imagine a larger container with one side having warm, dry air (not above 60c as mentioned) pumped through, while on the other end a vacuum of sorts suck out the air. You could have underneath a bed of silica gel beads (maybe with a removable, air sealed tray), and of course the air pump IN would have to be stronger than the air vacuumed OUT, to give time for the filament to dry out.
Printed Model of Motor Cooling Fan...
06-09-2024, 02:07 PM in General 3D Printing Discussion