Quote Originally Posted by Horia View Post
This model has 3 perimeters and it was printed on it's side. The infll is youching the inner perimeter a little above that bulge.
Here is the infill touching the inner perimeter:
https://drive.google.com/file/d/0B0w...ew?usp=sharing
Here is the bulge:
https://drive.google.com/file/d/0B0w...ew?usp=sharing
Oh sorry, I did not see the bulge before.

Can I assume you printed that hook on it's side, and the other object standing up tall? if that is the case it looks just like my flashforge prints most of the time. If you are using simplify 3D im pretty sure you can change the starting point of every layer.

If the starting position is "aligned" it will start the layer always from the same spot as you know, which can create that seem - but it's odd yours started doing randomly - it was ok before yeah?

mine has done this from day 1, so I use other programs to slice like makerware (it makes pretty good X3G) or a few others, but to be honest I only use simplify3D for my kossel and prusa now. I've never gotten better prints out of S3D so I stuck with what worked best for me.