Results 1 to 10 of 22
Threaded View
-
03-01-2016, 02:57 AM #7
This model has 3 perimeters and it was printed on it's side. The infll is youching the inner perimeter a little above that bulge.
Here is the infill touching the inner perimeter:
https://drive.google.com/file/d/0B0w...ew?usp=sharing
Here is the bulge:
https://drive.google.com/file/d/0B0w...ew?usp=sharing
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help