Results 1 to 9 of 9
Threaded View
-
02-19-2016, 01:32 PM #1
- Join Date
- Feb 2016
- Posts
- 14
Extruder not reaching operating temp
I am unable to load filament into my new CTC 3D Printer. The extruders will not reach the 230 C required for the load procedure. Looking at the control panel in ReplicatorG, they will not heat beyond 219 C. Any Ideas on what may be wrong?
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion