Results 1 to 2 of 2
Thread: Bed leveling problem
-
02-18-2016, 06:48 PM #1
- Join Date
- Jan 2016
- Posts
- 4
Bed leveling problem
I've tried using the SD card that came with the Creator Pro to perform the bed leveling process. However, it positions the extruders at approx the center of the bed and then instructs me to press "M" to continue. What is this? I'm not connected to the computer [which uses Simplfy3D], so I would think this operation should be a self contained procedure. What am I doing wrong?
-
02-19-2016, 06:56 AM #2
- Join Date
- Feb 2016
- Location
- Midwest
- Posts
- 3
My PC is a room too far from the printer to use a usb cable. So I also use the SD card. instead of "M" I simply hit OK, and move the extruders manually. Then rehome the axis.
nooby question,sorry
09-24-2024, 12:06 PM in General 3D Printing Discussion