Results 1 to 7 of 7
Thread: Need some help with my printer
Threaded View
-
02-17-2016, 08:20 AM #2
The Y Home position is probably Not zero (o.o)
but something like 50 or 100 ?
May even be a Negative number, like -50.
Home position number is not the same number on all printers,
with different firmware and bed sizes.Last edited by EagleSeven; 02-17-2016 at 08:28 AM.
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion