Results 1 to 3 of 3
Thread: Makerbot v 3.7 slicing
-
02-06-2016, 02:28 PM #1
- Join Date
- Feb 2016
- Posts
- 2
Makerbot v 3.7 slicing
Looking for an answer to why Makerbot ver 3.7 will only slice a 674K .STL file to 94%.
-
02-07-2016, 11:56 AM #2
Incomplete slice usually means there is a defect in the mesh. Run it through Nettfab to clean it up.
-
02-07-2016, 03:49 PM #3
- Join Date
- Feb 2016
- Posts
- 2
Ender 3v2 poor printing quality
10-28-2024, 09:08 AM in Tips, Tricks and Tech Help