Results 1 to 7 of 7
Thread: print lifting off bed
Threaded View
-
02-07-2016, 08:17 AM #7
try adding a small brim to the problem areas.
kind of a pita but you get nice flat prints
I make 0.25 or 0.5 mm thick brims about 20-25 mm diameter in my problem spots and it helps. It messes up the print pattern on the bottom face though.
BambuX1Carbon($2k) vs MarkTwo($20k)
05-31-2024, 12:45 PM in 3D Printers (Hardware)