Results 1 to 4 of 4
Thread: Pegasus vs i3v
-
02-01-2016, 01:58 PM #1
- Join Date
- Oct 2014
- Posts
- 31
Pegasus vs i3v
Are there any advantages to purchasing the i3v over the Pegasus (assuming the same bed size)?
-
02-04-2016, 07:14 PM #2
- Join Date
- Feb 2015
- Location
- Brazil
- Posts
- 26
If I was to get it now I would certainly go with the Pegasus as the wood on the i3v flexes more that I'd like it to.
As a matter of fact I'm contemplating the upgrade to a fully extruded frame, just not sure if PEgasus, DIY or go to a delta...
-
02-05-2016, 04:27 PM #3
- Join Date
- Nov 2014
- Location
- Brevard, NC
- Posts
- 182
If you are going DIY, here is a good site to look for ideas if you have not been there.
http://www.openbuilds.com/?category=...le-bots&id=276
-
02-09-2016, 08:18 PM #4
- Join Date
- Feb 2015
- Location
- Brazil
- Posts
- 26
Wow Dave! Really cool site. Thanks for that.
Holes and pockmarks in print walls
06-04-2024, 09:14 AM in General 3D Printing Discussion