Results 111 to 120 of 4110
Thread: Qidi Tech 1 - Replicator 1 clone
-
02-03-2016, 03:31 PM #111
- Join Date
- Jan 2016
- Posts
- 81
Do you have pictures of your current setup? You replaced the extruder correct? Are you using the side mounted fan or a 3D printed shroud?
-
02-03-2016, 03:44 PM #112
Qidi Tech sent me a complete new Extruder Assy. for $55 and yes it includes the cooling fan. I use S3D and it does control the fan.
I also have extra parts and even bought and few more spares from them on Ebay. They had great prices. Picked up a CTC printer for $150 on Craigslist locally and have rebuilt it using my original Qidi Tech extruders. It uses the same board as my Qidi Tech.
Here is a picture of my current set up.IMAG0468.jpg
-
02-03-2016, 03:57 PM #113
- Join Date
- Jan 2016
- Posts
- 81
Nice setup! So the ctc works better with the extruders from QIDI? How easy was it to replace?
-
02-03-2016, 04:01 PM #114
- Join Date
- Jan 2016
- Posts
- 81
Oh I have some extra parts I got with mine that I don't know what it is for... Some little black plastic thing that has a hole in the middle and a flexible hinge that lets it pop open... No clue what it is for.
-
02-04-2016, 01:13 PM #115
- Join Date
- Jan 2016
- Posts
- 81
-
02-04-2016, 11:16 PM #116
- Join Date
- Jan 2016
- Posts
- 81
So I have noticed some weirdness on 'top' solo'd layers... Take a look at these:
not sure why or how to fix it. Any ideas??
-
02-05-2016, 08:11 AM #117
-
02-05-2016, 09:02 AM #118
- Join Date
- Jan 2016
- Posts
- 81
This forum has a lame way of adding images... lol
IMG_2936.jpgIMG_2940.jpg
-
02-05-2016, 10:15 AM #119
I'm not an expert but that looks a little under extruded to me. Usually your last 2 to 4 layers are solid so it would need more plastic coming out quicker. Whats your extrusion percentage set at?
This link is a good guide to diagnose print issues https://www.simplify3d.com/support/p...oubleshooting/
-
02-05-2016, 11:18 AM #120
- Join Date
- Jan 2016
- Posts
- 81
I/m using whatever the default settings are in Makerware for the dual extruder they have as a device lol.
I need to get S3D... Do you use it?
Printing time- Is this right?
09-13-2024, 07:51 AM in General 3D Printing Discussion