Results 1 to 10 of 19
-
01-29-2016, 06:44 AM #1
- Join Date
- Jan 2016
- Posts
- 326
How to set up Slic3r for PowerSpec Ultra 3D printer?
How do I set up stand-alone Slic3r for PowerSpec Ultra 3D printer? Which firmware does the printer use? I think that stand-alone Slic3r is more powerful than the one that came with the printer.
-
01-29-2016, 09:14 AM #2
I've never used it (I use S3D, its well worth the 150.00 bucks), but from what I've read you need to find a different slicer.
-
01-29-2016, 10:47 AM #3
If it's a replicator clone - then you need something to convert gcode to x3g files.
Try this : https://knp3d.com/wp-content/uploads..._vs1.1.0.0.zip
with this version of slic3r: http://knp3d.com/software/#
-
01-29-2016, 02:52 PM #4
- Join Date
- Jan 2016
- Posts
- 326
I think that my printer is Flashforge Creator clone. The software that came with my printer generates gcode files.
-
01-29-2016, 06:51 PM #5
- Join Date
- Jan 2016
- Posts
- 326
I bought Simpiifly3D but I don't know how to set upSimplify3D for PowerSpec Ultra 3D. I think that my printer is Flashforge Creator clone but the cabinet is similar to Flashforge Creator Pro 3D.
-
01-30-2016, 12:39 PM #6
I believe you need to use the FFCP machine.
-
01-30-2016, 04:26 PM #7
- Join Date
- Jan 2016
- Posts
- 326
Please look at the following 3D printers:
PowerSpec Ultra 3D at http://www.microcenter.com/product/4...tra_3D_Printer
Dremel 3D Idea Builder at https://3dprinter.dremel.com/
Flashforge Dreamer at http://www.flashforge-usa.com/shop/3...d-printer.html
These printers are Flashforge Dreamer clones and I tried to use the configuration file for Flashforge Dreamer but when I start printing, the heads start moving without waiting for the heated bed and extruders to heat up.
-
01-31-2016, 05:22 AM #8
did you try the files I posted links to ?
have you tried makerware yet ?
Your machine is NOT a dreamer - for slicer purposes it's a 'replicator dual'.
You cannot use gcode files you must convert to x3g files.
-
01-31-2016, 06:02 AM #9
-
01-31-2016, 06:03 AM #10
Printer will print perfect...
06-14-2024, 10:44 AM in Tips, Tricks and Tech Help