Results 1 to 10 of 10
Threaded View
-
01-27-2016, 06:00 PM #5
- Join Date
- Jan 2016
- Posts
- 5
I understand the limits of various plastics, and I'm not looking for a "default value", I already know that I need about 0.3mm of clearance to get PLA printed by my printer to assemble. My question is how I might adjust the files to achieve that 0.3mm of clearance on both an inner and an outer dimension, when in this case the inner dimension needs expanding 0.3mm and the outer dimension needs shrinking 0.3mm.
Qidi X Plus 3 Paper thin first...
Yesterday, 01:15 AM in General 3D Printing Discussion