Results 1 to 9 of 9
Threaded View
-
01-27-2016, 02:14 AM #6
- Join Date
- Aug 2015
- Posts
- 21
Here is a thingiverse link containing an example stl file http://www.thingiverse.com/thing:1296829. The issues become very obvious when printing with an infill of about 5-10%. The errors occur when the printer starts to build the internal supports on top of the infill for the inset frames of the door.
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion