Results 1 to 3 of 3
-
01-23-2016, 10:07 PM #1
Marlin config error, can't figure this one out!!
Hey guys!
So I've managed to get alot of my firmware configured, however out of no where this error started popping up...the bold red underlined text.
#define XYZ_CONSTS_FROM_CONFIG(type, array, CONFIG) \
static const PROGMEM type array##_P[3] = \
{ X_##CONFIG, Y_##CONFIG, Z_##CONFIG }; \
static inline type array(int axis) \
{ return pgm_read_any(&array##_P[axis]); }
It's located in the marlin.main.cpp file.
Any ideas?
I changed the baudrate and then it started acting up and wont verify without this error.
Thanks in advance!
-
01-23-2016, 10:55 PM #2
If you fork a particular Release Candidate or branch... It is real easy for people to look at what you are seeing and offer a suggestion. What branch are you using right now? Is it Marlin or MarlinDev? Etc. Etc.
-
01-24-2016, 11:00 AM #3
My 3D Norn Emissary print
09-13-2024, 02:28 AM in 3D Printing Gallery