Results 1 to 10 of 11
Threaded View
-
01-20-2016, 08:26 AM #2
I made some gears using PLA, which I drilled and tapped for set-screws
and they worked great !
But you Must have Solid plastic at area of set-screw, (100% infill when printed)
(large diameter set-screws, with large threads, is best)
(Of course those gears are used in a low-speed, low-torque motor application)Last edited by EagleSeven; 01-20-2016 at 08:36 AM.
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help