Results 1 to 10 of 18
Threaded View
-
01-13-2016, 07:00 AM #3
- Join Date
- Mar 2015
- Posts
- 28
One of the developers of the Sailfish firmware (what your printer likely runs if it's a Creator) says he put the 280C limit in on purpose and has no plans to change it. He said it's too much of a fire risk otherwise because of components near the heater that do poorly at higher temperatures.
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion