Results 1 to 5 of 5
Thread: Build a structured light scanner
-
01-11-2016, 01:23 PM #1
- Join Date
- Aug 2015
- Posts
- 43
Build a structured light scanner
Looking in short time for a good scanner I did arrived to consider David Laser Scaner 3.
Appear to be a good product, but appear some does simply purchase the sw and assemble by himself the various components: camera, projector, rail, calibration.
So I'm vary about spending the thousand $ for something I can build from myself with COTS components...or I did under evaluate the effort needed to select, assemble and calibrate the whole ting? Also self assembling it's a real saver, considering a good projector will cost about $800 and a DSLR camera+lens also?
I.e. there are specific needs for the projector and the camera? There are any assembly guide?
-
01-12-2016, 12:35 PM #2
- Join Date
- Jun 2014
- Location
- Spring Hill, TN
- Posts
- 77
I bought the David 4 software, their calibration panels, purchased the same projector they use K132, bought my own industrial CCD camera (pretty much the same one they use), used a v-slot linear rail and 3D printed my own adjustable projector and camera mounts. I also bought a new Windows laptop just for the scanner. All in for $2100.00
Acer Aspire V15 laptop w/ 8g ram / Windows 10, Acer K132, DFK 42BUC03 CCD camera, Computar Megapixel 2/3 12mm lens, David 4.0, V-Slot 1000x20x40 linear rail, Cam and Projector mounts 3D printed.
Lots of info on the David forums.
IMG_2786.jpg
-
01-12-2016, 01:46 PM #3
- Join Date
- Aug 2015
- Posts
- 43
-
01-12-2016, 04:22 PM #4
- Join Date
- Jun 2014
- Location
- Spring Hill, TN
- Posts
- 77
Never seen the SLS-3 but as far as I know the only difference is the newer CCD and believe me, they charge a mega premium for their camera and I don't see the value in it personally.
-
01-12-2016, 04:51 PM #5
- Join Date
- Aug 2015
- Posts
- 43
New member with print issue
06-11-2024, 08:57 AM in Tips, Tricks and Tech Help