Results 1 to 3 of 3
-
01-11-2016, 04:57 AM #1
- Join Date
- Jan 2016
- Posts
- 326
Tips and tricks on using BuildTak?
I ordered some BuildTak after ripping the Kapton tape on my PowerSpec Ultra 3D printer while removing objects from the printer. Any tips and tricks on using BuildTak?
-
01-11-2016, 05:38 AM #2
It grabs ABS very, very well. Be careful removing your work.
-
01-11-2016, 11:25 AM #3
Davo is correct. Things will adhere to it incredibly well. Start your prints with an extremely low bed temperature just to feel it out at first. If you print ABS onto it at 100C you will likely ruin the print and the sheet trying to pry/scrape it off.
Printer will print perfect...
Yesterday, 10:44 AM in Tips, Tricks and Tech Help