Results 1 to 9 of 9
Threaded View
-
01-10-2016, 11:32 AM #4
- Join Date
- Dec 2015
- Posts
- 3
You can rotate your models in Cura. I have 15.04.03 and when the model is selected the tool in the lower left -- the hourglass with the arrow curving around it -- is the rotation tool. Click on that and you'll get rings you can drag to change the angle of the model.
(I haven't tried Slic3r yet. Can't help you there.)
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion