Results 1 to 6 of 6
Threaded View
-
01-08-2016, 01:14 PM #5
- Join Date
- Sep 2015
- Location
- Cocoa, FL
- Posts
- 10
It worked!
Today I finally got a chance to print this thin-walled cylinder again on blue painter's tape and with the heated bed off. I am happy to report that this indeed solved the warping problem! See pictures below.
Thank you both for the help and happy new year!
Chachin..
Edit: Not sure why the picture turned out so small.Last edited by Chachin; 01-08-2016 at 01:21 PM.
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help