Results 1 to 7 of 7
-
01-06-2016, 07:54 PM #1
- Join Date
- Jan 2016
- Posts
- 3
Auto-leveling-Prusa-i3-3D-Printer-kit-Melzi-control
hai guys i have buy this printer
http://www.aliexpress.com/item/Auto-...332469089.html
and ih ave some problems with it:
i cant calibrate properly is there any software that can help me calibrate properly
my extruder looks working with heating and other, but they dont want to print. the extruder motor is spinning but the nozzle wont out the plastic.
-
01-07-2016, 02:08 PM #2
You will need to become familiar with Marlin firmware:
http://solidutopia.com/marlin-firmwa...r-guide-basic/
There is no software to help you calibrate your printer, but there are many many online guides.
-
01-07-2016, 06:29 PM #3
-
01-07-2016, 07:28 PM #4
- Join Date
- Jan 2016
- Posts
- 3
-
01-07-2016, 09:30 PM #5
My opinion is you should do that. I'm sure lots of people would disagree. But to get the best support here, (or at https://github.com/MarlinFirmware/Marlin/issues) You will need to be able to rebuild the firmware. And in fact, there are really good features in the pipeline that you need that ability to get. It really is not difficult. You just install Arduino, unpack the Marlin files, and tell Arduino to compile it. Then you tell Arduino to upload it to your controller board. (There are a few more steps like telling Arduino what type of board you are using and such...) The steps are all well documented.
-
01-07-2016, 09:50 PM #6
- Join Date
- Jan 2016
- Posts
- 3
-
01-08-2016, 10:01 AM #7
This video will help you immensely. Watch the whole thing before trying anything.
https://www.youtube.com/watch?v=gfxLOxyGdaI
Printer will print perfect...
06-14-2024, 10:44 AM in Tips, Tricks and Tech Help