Results 1 to 10 of 10
Thread: Hot end and stepper motor issue.
Threaded View
-
01-05-2016, 11:52 PM #2
- Join Date
- Dec 2015
- Posts
- 50
Also, I should mention:
RAMPS 1.4 board
Makerfarm i3v 12"
trim pots adjusted to 0.66v
DRV8825 stepper drivers
e3d v6 hotend
The motors work perfectly when the hot end isn't heating. At least they move smoothly and consistently.
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion