Results 1 to 10 of 14
Threaded View
-
01-05-2016, 03:38 PM #9
- Join Date
- Jul 2015
- Posts
- 5
Hi Matt,
The cylinder block was printed in one piece (not counting the caps). I attached a zip of the files. Sorry it is so disorganized. I designed it in FreeCAD, so you can open the design file in that to see the assembly. The aluminum rod used for the crank shaft and vertical supports is 1/4", available at any hardware store. I believe the screws for the caps were 4-40 and the rest were 6-32. I'll be happy to answer any questions you have.
Geoffrey Schulz
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help