Results 1 to 8 of 8
Thread: Multiple oddities
Threaded View
-
12-28-2015, 03:12 PM #2
- Join Date
- Sep 2014
- Location
- Brummen, Netherlands
- Posts
- 265
Looking at your raft, the tip of the nozzle is way too high over the bed for the first layer. You can see it spiralling and only the lower curves of the spiral are clinging to the bed.
Have you done the levelling procedure with a piece of paper between nozzle and the bed?
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help