Results 1 to 4 of 4
-
12-27-2015, 08:29 AM #1
HATCHBOX 1.75mm Silver ABS 3D Printer Filament
This is my first BAD experience with a filament right out of the box. This is stuff is worthless. This is what it looks like extruded, and yes the nozzle and tube are 100% clean.
20151227_092004.jpg
-
12-28-2015, 08:42 AM #2
-
12-28-2015, 11:46 AM #3
- Join Date
- Dec 2015
- Posts
- 3
Hello all,
I started using this after my favorite silver (Solutech) disappeared for a while. I've been printing a bunch of it on Prntrbot Metal Simples and Makergear M2 and the prints are fine. No issues, prints looks great, no layer adhesion issues. A little bit harder to get initial stick to Buildtak, but a little gluestick fixes it up pretty easily (non-heated beds on simples.)
My experience FWIW...
Bob
-
12-28-2015, 01:40 PM #4
My 3D Norn Emissary print
09-13-2024, 02:28 AM in 3D Printing Gallery