Results 1 to 8 of 8
Thread: Circular hole coming out oval
Threaded View
-
12-26-2015, 01:03 PM #2
Being new to 3D printing, you really started off with a pretty big mod for you bot..
I'm thinking your temps are way too high at first glance. I would shoot for bed temp of ~100C and extruder temp of ~220C. Are you using blue painters tape or that whitish masking tape? I've read blue masking tape works much better. (I use glass and hairspray).
Printer will print perfect...
06-14-2024, 10:44 AM in Tips, Tricks and Tech Help