Results 1 to 8 of 8
Thread: Circular hole coming out oval
Threaded View
-
12-26-2015, 01:03 PM #2
Being new to 3D printing, you really started off with a pretty big mod for you bot..
I'm thinking your temps are way too high at first glance. I would shoot for bed temp of ~100C and extruder temp of ~220C. Are you using blue painters tape or that whitish masking tape? I've read blue masking tape works much better. (I use glass and hairspray).
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help