New CTC Owner

[EagleSeven]

Wait do I need one of these if I add a glass sheet on bed?

http://www.thingiverse.com/thing:911247



Also only took the entire day with like half a dozen failed prints but finally got it done.

20151226_033154.jpg

We did not need that Adapter at thiniverse, I'm really not sure what it is For ??

Your extenders look Great !

But I would have rotated the position of them to make the bed much longer in X, less in Y direction, as per my description.
Since there is a bed size selection in Makerbot slicer that uses that area in X direction but not much in Y.
In my description I gave measurements of glass as 11 1/8" X 6 7/8",
which fits, if brackets are positioned that way.
(We have needed that extra length of 11" several times, which is about 12" if angled diagonally)
If you find a way to actually use that extra space in Y direction, using Makerbot slicer, please let me know.

It appears that you still have the Kapton tape on bed-plate.
That needs to be removed before attaching glass to aluminum-plate,
using Aqua-net spray, for good heat transfer.
(tape will act as an Insulator and effects bed-leveling adjustment also)