Results 1 to 6 of 6
Threaded View
-
12-25-2015, 06:07 PM #3
- Join Date
- Sep 2015
- Location
- Cocoa, FL
- Posts
- 10
Thank you for the explanation Printbus. Yes, I am printing on a heated glass bed coated with Garnier Fructis hairspray. I do have some blue painters tape on hand. I've never printed on tape before, so I will give it a try with the bed cold and the tape swabbed clean with alcohol. I'll report back.
For reference, I attached a photo of the same cylinder being printed on top of a thick plastic base (different part sharing the same cylinder). The same thin cylinder does not deform in this case.
Chachin..
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help