Subscribe to Our Newsletter Advertise
Close



Results 1 to 10 of 10

Thread: MK8 or MK9?

Threaded View

  1. 12-20-2015, 06:12 PM #8
    mikejsmith1985
    mikejsmith1985 is offline
    Student
    Join Date
    Dec 2015
    Posts
    3
    Well my hot ends appear to have a tapered metal end just large enough for the filament to fit in ill take a pic when my prints finish and share them.

    Went to take the pic and I see how these seem to work differently than I expected. The ptfe gets inserted from the nozzle side not the extruder side so you don't have to completely disassemble. My only other experience is the hexagon and the e3d v6 on the ROBO so I was kind of narrow minded in my approach to this. In the pic the flash reveals the PTFE tube inside the hotend.

    Last edited by mikejsmith1985; 12-20-2015 at 07:23 PM.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules