Subscribe to Our Newsletter Advertise
Close



Results 1 to 10 of 36

Threaded View

  1. 12-18-2015, 07:03 PM #22
    ServiceXp
    ServiceXp is offline
    Engineer-in-Training ServiceXp's Avatar
    Join Date
    Apr 2015
    Location
    USA
    Posts
    380
    Follow ServiceXp On Twitter Add ServiceXp on Google+ Add ServiceXp on Thingiverse
    You need to install a GFCI outlet for that printer.. You have a problem, and until you sort it out you should not let anyone around that machine, and certainly don't leave the unit plug-in unattended.

    You should not be getting cabinet voltage (> then say 500mv) to ground period. If the only thing that is plugged into that PSU is power input and the wiring is correct and your still getting high voltage to ground from any component on that machine, I would replace the power supply.
    Last edited by ServiceXp; 12-18-2015 at 07:21 PM.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules