Results 1 to 4 of 4
Threaded View
-
12-17-2015, 02:03 AM #2
Unless the thing heats above 40°C, pretty much anything goes as long as you ensure the proper fill and perimeters.
If it does heat above 50°C, try PET, nylon or ABS.
Unless the thing heats above 40°C, pretty much anything goes as long as you ensure the proper fill and perimeters.
If it does heat above 50°C, try PET, nylon or ABS.
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help