Results 1 to 8 of 8
Threaded View
-
12-16-2015, 08:12 PM #7
- Join Date
- Oct 2013
- Location
- new jersey
- Posts
- 752
pet is a sticky plastic. if you are getting it collecting on the nozzle then that means you are overextruding. if its only collecting while on the first layer then you are squishing your first layer too much. in anycase, its not necessarily from oozing. any overextruded material will be collected by the nozzle.
Holes and pockmarks in print walls
06-04-2024, 09:14 AM in General 3D Printing Discussion