Results 1 to 10 of 12
Thread: Max temp limit in marlin
Threaded View
-
12-16-2015, 09:19 AM #9
- Join Date
- Oct 2015
- Posts
- 35
Hi Roxy,
Thanks for the quick response, really appreciate the help.
I tried with your modified code in temperature.c but I get an error pointing array extruders1 when compiling. I did remove the reference to Heater 3 as my original only had heaters 0,1,2 and ended up with the code below
I can't attached the INO file as it's an invalid file for the forum, and I'll try to avoid copy/pasta the whole text file.
static int minttemp_raw[EXTRUDERS] = ARRAY_BY_EXTRUDERS( HEATER_0_RAW_LO_TEMP , HEATER_1_RAW_LO_TEMP , HEATER_2_RAW_LO_TEMP );
static int maxttemp_raw[EXTRUDERS] = ARRAY_BY_EXTRUDERS( 32000 , 32000 , 32000 );
static int minttemp[EXTRUDERS] = ARRAY_BY_EXTRUDERS( 0 , 0 , 0 );
static int maxttemp[EXTRUDERS] = ARRAY_BY_EXTRUDERS( 32000, 32000, 32000 );
Mjolinor, interesting idea. I'll have to investigate.
Qidi X Plus 3 Paper thin first...
Yesterday, 01:15 AM in General 3D Printing Discussion