Results 1 to 10 of 12
Thread: Max temp limit in marlin
Threaded View
-
12-16-2015, 07:52 AM #6
Yeah... I think I found a bug in Marlin. This may be a work around:
In Temperature.cpp change these lines:
Code:static int minttemp_raw[EXTRUDERS] = ARRAY_BY_EXTRUDERS( HEATER_0_RAW_LO_TEMP , HEATER_1_RAW_LO_TEMP , HEATER_2_RAW_LO_TEMP, HEATER_3_RAW_LO_TEMP); static int maxttemp_raw[EXTRUDERS] = ARRAY_BY_EXTRUDERS( HEATER_0_RAW_HI_TEMP , HEATER_1_RAW_HI_TEMP , HEATER_2_RAW_HI_TEMP, HEATER_3_RAW_HI_TEMP); static int minttemp[EXTRUDERS] = { 0 }; static int maxttemp[EXTRUDERS] = ARRAY_BY_EXTRUDERS1(16383)
Code:static int minttemp_raw[EXTRUDERS] = ARRAY_BY_EXTRUDERS( HEATER_0_RAW_LO_TEMP , HEATER_1_RAW_LO_TEMP , HEATER_2_RAW_LO_TEMP, HEATER_3_RAW_LO_TEMP); static int maxttemp_raw[EXTRUDERS] = ARRAY_BY_EXTRUDERS( 32000 , 32000 , 32000 , 32000 ); static int minttemp[EXTRUDERS] = { 0 }; static int maxttemp[EXTRUDERS] = ARRAY_BY_EXTRUDERS1(32000)
Last edited by Roxy; 12-16-2015 at 08:08 AM.
Holes and pockmarks in print walls
Yesterday, 09:14 AM in General 3D Printing Discussion