Results 1 to 9 of 9
Threaded View
-
12-14-2015, 08:59 AM #4
- Join Date
- Oct 2015
- Posts
- 10
the printer is 150mm x 150mm x 240mm which is small enough for Kids to handle while Year 4 to Year 12 from primary/secondary school are the best..
the maximum print size is only 80mm x 80mm x 80mm but can make a robot figture with joint for about 400mm in height.
robot figure can find from www.tinkerplay.com
BambuX1Carbon($2k) vs MarkTwo($20k)
05-31-2024, 12:45 PM in 3D Printers (Hardware)