Results 1 to 3 of 3
Thread: FlashForge Dreamer
-
11-30-2015, 12:07 PM #1
- Join Date
- Nov 2015
- Posts
- 1
FlashForge Dreamer
Hello everybody,
I have a flashforge 3D Dreamer printers.
Unfortunately I have problems with wifi.
I have an address range 192.168.0. ###
and now the FlashForge Dreamer has the IP 10.10.100.254
Now I have changed by software (wifi), the IP address (192.168.0.150), unfortunately I can no longer be addressed via WIFI printer.
The display from Dreamer appears 10.10.10.254:8899.
Is there a possibility to reset the Dreamer (not the small button next to the SD slot) but a factory reset where the WIFI address is reset.
Greeting Herbert
-
12-12-2015, 10:49 AM #2
- Join Date
- Oct 2015
- Posts
- 12
-
12-12-2015, 01:51 PM #3
- Join Date
- Jan 2015
- Posts
- 62
Hello,
Go here, http://www.flashforge-usa.com/support/downloads/
And download the Dreamer User Manual. It will tell you how to set up WIFI. You will probably have to start from the beginning and do it over again.
Holes and pockmarks in print walls
06-04-2024, 09:14 AM in General 3D Printing Discussion