Results 1 to 10 of 12
Thread: Any tips in Bridging with PETG?
Threaded View
-
12-11-2015, 02:28 PM #6
- Join Date
- Jan 2015
- Posts
- 62
I tried 220 but the bonding was not that great. So I'll have to stick in the 230 or + range. I tried turning active cooling off except for bridging operations but I did not get good results. Seems like having active cooling on makes a better looking print. Going to play with bridging speed now that I got the temp set as low as I can to get a good bond.
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help