Results 11 to 14 of 14
-
12-05-2015, 02:40 PM #11
- Join Date
- Dec 2015
- Posts
- 8
Capture6.JPGCapture7.JPGhere are some more setting
-
12-05-2015, 02:52 PM #12
- Join Date
- Dec 2015
- Posts
- 8
Here is the plate with crack glued. Also here is a better example of the warping, this was printed from makerbot Examples, Makerbot_set.thing stl.Attachment 8000Attachment 8001
-
12-05-2015, 02:57 PM #13
- Join Date
- Dec 2015
- Posts
- 8
the make and age of the filament. The make is makerbot PLA. The age i would think a year or two old
-
12-05-2015, 07:21 PM #14
Ok, so you still haven't put all the settings up, and the attachment link seems to be broken. BUT I think you should get some fresh filament before doing anything else. I noticed that your filament diameter is 1.77 in your settings, did you measure the actual filament at 1.77? (I use Hatchbox and have never ever seen my diameter that far out from 1.75)
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help