Results 1 to 10 of 24
Threaded View
-
12-05-2015, 09:03 AM #8
Hey /dev/null,
As far as I understood, the Peachy Juice is indeed almost identical to the Maker Juice and also manufactured by the same guys.
The only differences are that because of Peachy being a top-down printer rather than a bottom-up, the formula could be changed a little making it perform worse in certain properties which the Peachy Printer isn't too sensitive to and better in other properties (maybe cheaper?).
Regarding different resin-types:
I had expected you to do some research before posting:
https://www.kickstarter.com/projects...c/posts/612202
* Actually that information about different types of resin is even on the start page of the Kickstarter if you scroll down..
Currently those other two resins (flex & wiggle) are still prototypes but I hope they are going to bring that topic back up some time
Greetings, quertzLast edited by quertz; 12-05-2015 at 09:08 AM.
Holes and pockmarks in print walls
06-04-2024, 09:14 AM in General 3D Printing Discussion