Results 1 to 7 of 7
Threaded View
-
12-04-2015, 06:54 PM #3
- Join Date
- Sep 2015
- Location
- England
- Posts
- 5
Thanks for the help, i appreciate it.
Yes i had the extruder off and cleaned some very very small flakes but nothing much, then put it all back again and no different.
when i load the extruder it pulls the filament in nice and smooth and ive held it back with some pressure and it managed to pull it np unless i really do hold it back then the extruder starts clicking. so im lost to what can be happening. the print im printing is a print ive done 20 or 30 times so its not that.
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help