Results 1 to 5 of 5
Threaded View
-
11-23-2015, 12:46 PM #5
- Join Date
- Jan 2015
- Posts
- 306
I also very readily hit high precision (I can hit 0.15mm first layers once the machine is calibrated). The micro switch/servo method is not bad by any means. I just wanted to know, if a 6 dollar part could possibly improve it.
The brackets are made of ABS, and since I run my machines very hot (I print a lot of Polycarbonate) the ABS bracketry that supports the switch and servo, over time, starts to warp. I could have the parts machined out of aluminum but I would rather not since I have many machines and this will be costly.
Printer will print perfect...
Today, 09:40 AM in Tips, Tricks and Tech Help