Results 1 to 2 of 2
Thread: PLA Layer Separation Diagnosis
Threaded View
-
11-18-2015, 10:15 PM #2
- Join Date
- Nov 2015
- Posts
- 2
I was having a similar issue with my Z18. I found that the room temperature to be a big part of my problem. My printer was directly underneath an AC vent. Moved the printer and heated the chamber to a toasty 30C. It's still not where I want it, but its a start.
Printed Model of Motor Cooling Fan...
Yesterday, 02:07 PM in General 3D Printing Discussion