Results 1 to 10 of 12
Thread: G-Code Commands
Threaded View
-
11-18-2015, 10:34 AM #3
- Join Date
- Oct 2015
- Posts
- 11
Hi Davo,
I may have misunderstood upon first read as I tried using M104 S240 T12 and upon reaching the layer I had put that G-code in at, the temperature did not change. Upon second read, I realized that I should use M109 S240 T12 instead, and I will try this next time I print. Will placing this upon a layer change cause the printer to stop though and wait for the temperature to rise to 240 from 235?
Also, the M221 S1.1 T12 seems to have worked perfectly and I used M140 S0 and M140 S45 to change the bed temperature as well. Thanks for your help so far.
RD_3D
New member with print issue
06-11-2024, 08:57 AM in Tips, Tricks and Tech Help