Results 1 to 10 of 11
Threaded View
-
11-17-2015, 10:41 PM #5
Yeah, I didn't think to change the temp settings when I sliced it. I think my default was either 230 or 235 for the extruder and it started getting stringy, so I dropped it 10 and that seemed to do the trick. I have a PEI sheet on my glass that I hope is salvageable. I will try 80 and go from there, thanks!
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion