Results 1 to 10 of 63
Threaded View
-
11-13-2015, 05:44 PM #33
Can you provide a good picture of the relay on the heat bed? If it is a mechanical relay, you'd have to either wire that relay so that it is energized all the time or jumper across the contacts for that relay. PID requires the use of a solid-state relay that can be switched on and off much faster than possible with a mechanical relay.
BambuX1Carbon($2k) vs MarkTwo($20k)
05-31-2024, 12:45 PM in 3D Printers (Hardware)