Results 31 to 32 of 32
Thread: Any Problem Contact Me
-
11-07-2015, 07:56 PM #31
- Join Date
- Aug 2015
- Posts
- 12
Alfred,
If I used a different projector with a native resolution of 1920x1080 what settings in the CaptureSetting.ini to make it work? I can of course bring it down to 800x600 but I want to be able to test different configurations. I just like to tinker too.
You can private message me if you want.
-
11-07-2015, 08:08 PM #32
- Join Date
- Aug 2015
- Posts
- 12
actually would a ratio of 1920:800 to change all the settings work? Like for example Step0 I could use:
Pixelwidth= 38 (rounding 38.4 down or does it need to be 38.4?)
Frangenum=100.000000000
MoveNum= 29 (rounding 28.8 up or does it need to be 28.8?)
StepMSecond=40
jumpMsecond=40
Ender 3v2 poor printing quality
10-28-2024, 09:08 AM in Tips, Tricks and Tech Help