okay so i am back to where i started , everything seems fine up to the horizontal rod radius .... changing the value , even to the extreme , changes nothing.

First g28 , then i raised my z height from 338.9 to 350
Then I used these cords.(g1 x0 y66 , g1 x057 y-33 , g1 x57 y-33 )
I took a measurement from print head to bed with paper height readings were as follows
z 1.10 x 1.00 y .30 , I moved my set screw on each to dial them all in to 1.00
now i measured middled at 11.30 no matter how I adjust the Horizontal rod radius , I can not get it to come any closer to 1.00

I feel like im doing something wrong.